显示标签为“Wastewater Treatment”的博文。显示所有博文
显示标签为“Wastewater Treatment”的博文。显示所有博文

2020年6月8日星期一

Only 3 Steps Of Poly Aluminum Chloride Will Greatly Enhance The Use Eff

According to the production process, poly aluminum chloride can be divided into three types, roller, plate and frame filter, spray drying. Relatively low cost is the drum of poly aluminium chloride, aluminum content is general, water insoluble matter is high, mostly used in sewage treatment.
The flocculation effect and flocculation rate of polyaluminum chloride under different conditions will be completely different. Huachang aluminum co., LTD. Is a large aluminum factory company, which is very satisfied in the process of using the poly aluminium chloride provided by us. Through the method provided by the company, it has solved the problem of wastewater treatment, achieved the effect that the customer wants, and become a constant partner.
Only 3 Steps Of Poly Aluminum Chloride Will Greatly Enhance The Use Effect
So, how do we improve and how do we improve the use of PAC?
1. The direct filtration process as a simplified treatment process is more economical and effective than traditional treatment.
2. It is necessary to add coagulant poly aluminium chloride to improve the surface properties of colloid before filtration in order to achieve good results in direct filtration, and the dosage of coagulant can be reduced by 40%-50% compared with the traditional process.
3. When poly aluminium chloride is used as a coagulant, the following factors influence the turbidity of effluent in turn: dosage of coagulant, filtration rate, dosage of coagulant aid and turbidity of influent. The effects of coagulant dosage, coagulant assistant dosage, influent turbidity and filtration rate on the total head loss index were in turn.
The flocculation effect of polymeric aluminum chloride also requires you to have a good process design when choosing good quality products, so that the sewage treatment can achieve twice the result with half the effort.
Marketing Center: Room 603, RuiYing Building, Chengnan 1st Road, Dali Town, Nanhai District, Foshan City, Guangdong Province,China, 528231
Factory: Area A No.9, Technology Park, Sanshui District, Foshan, Guangdong, China
Tel : +86 13929123248
Email : exp006@broviecn.com
Fax : 0086-0757-85510580

2019年3月12日星期二

Principles For Selection Of Sewage Treatment Processes

1. The main technical and economic indexes of process selection include: treatment of unit water investment, reduction of unit pollution investment, treatment of unit water consumption and cost, reduction of unit pollutant power consumption and cost, occupation of land, operation performance reliability, management and maintenance of the degree of difficulty, overall environmental benefits and so on.
2. Urban wastewater treatment technology should be selected according to the treatment scale, water quality characteristics, environmental functions of the receiving water body, local actual conditions and requirements, and selected after comprehensive technical and economic comparison.
3. It is necessary to determine the influent water quality of sewage, optimize the parameters of process design, and make a detailed investigation or determination of the current water quality characteristics of sewage, and make a reasonable analysis and prediction. The composition of water quality is complex. When special, the dynamic test of sewage treatment process should be carried out, and the pilot study should be carried out if necessary.
4. The new process should be adopted actively and prudently. For the new process that is applied for the first time, it must pass pilot test and production test, and provide reliable design parameters before application.
5. In the construction of the same sewage plant by stages, the same process should be adopted in each stage, and the construction scale of each stage should be the same as possible.