Tris(Hydroxymethyl) Aminomethane (TRIS) buffer
solution is a biological reagent, which is a buffer solution commonly
used in biological preparation and medical preparation. For example,
it’s commonly used in peprotech recombinant cytokines and protein
solubilization, and widely used as solvent for nucleic acid and proteins
electrophoresis. Usually, it is used as a liquid, but it is not easy to
store for a long time and the preparation is inconvenient. If it is
made into a tablet, the above problem will be well solved.
Some researchers have provided a preparation method of TRIS buffer tablets which are ready to use, easy to store, simple and quick to prepare. The steps are as follows:
(1) TRIS, boric acid, EDTA, cross-linked amylose (weight ratio:
54:22~23:3.0~3.5:3.3~4), pulverized to make into particles with 100~200
mesh; The main material trishydroxymethylaminomethane is in the grade of
pharmacopoeia; Excipients boric acid and EDTA are AR grade, crosslinked
amylose and microcrystalline cellulose are biological grade;
(2) mixing and stirring evenly;
(3) Tablet press, pressure 2~4 tons;
(4) Weighing and testing;
(5) Packaging.
The pH of the TRIS buffer
solution varies with temperature greatly, making it more difficult to
formulate the solution. The buffer tablet provided by the method is
simple and easy to use, and can be quickly opened and disintegrated as
long as the tablet is put into the quantitative water, thereby obtaining
a buffer solution with an accurate pH value, saving the user's manpower
and material resources and improving work efficiency. At the same time,
it is easy to store, carry and transport. The storage period is up to
3~5 years, and suitable for industrial production.
Edited by Suzhou Yacoo Science Co., Ltd.
2019年3月13日星期三
2018年10月12日星期五
TRIS, Bis-Tris, Tricine, TES, TAPS, What is the difference in application?
TRIS(Tris(Hydroxymethyl)Aminomethane),
Bis-Tris, Tricine, TES, TAPS are buffers commonly used in biochemical
experiments and molecular biology experiments, and they all contain the
structure of TRIS. Then what are the differences in application between
these buffers?
We hope that the following table could solve your doubts.
Table 1. The application of TRIS, Bis-Tris, Tricine, TES, TAPS
In specific use, buffers containing the TRIS (CAS:77-86-1)
structure will form a strong or weak complex with a variety of metal
ions, so the stability constant should be taken into account. In
addition, the buffer range and the appropriate type of experiment also
should be considered in order to obtain the best experimental results.
Edited by Suzhou Yacoo Science Co., Ltd.
2018年7月9日星期一
For the preparation of Coatings?The role of TRIS you may not know!
As we all know, Tris(Hydroxymethyl)Aminomethane
(TRIS) is not only widely used as a buffer for biological and chemical
experiments, but also as solvent for nucleic acids and proteins,
intermediates of surfactants, pesticide and drugs. But today, we will
introduce the application of TRIS you may not know——For the preparation
of Coatings.

TRIS (THAM)
plays four main roles in the preparation of the coating: pH regulator,
crosslinking accelerators, polyester coating materials and phase change
cores.
1. pH Regulator
The
effective buffering range of TRIS buffer is pH 7.0~9.2. Yuan et al. [1]
invented a non-yellowing polyester coating with best pH value of
7.5~8.5 in the preparation. Researchers used TRIS buffer to adjust the
pH value. The prepared product had good adhesion and scratch resistance,
and it will not significantly yellowed after high temperature operation
or aging.
2. Crosslinking Accelerator
Crosslinking
accelerators can act as bridging molecules between linear molecules, so
that multiple linear molecules are bonded to each other to form a
network structure. Polyhydric alcohols are often used as external
crosslinks in the preparation of coatings. Zhang Jianwei et al. [2]
invented a silane modified polyurethane glass coating with TRIS as a
cross-linking promoter. Which can be operated in the air at room
temperature for 40min without obvious thickening phenomenon.
3. Polyester Coating Materials
Polyhydric
alcohols, polyacids, catalysts and antioxidants can be used as a
coating composition. Deng Mujian et al. [3] used TRIS as the polyhydric
alcohols to react with the polybasic acid or anhydride terephthalic acid
or isophthalic acid, to obtain an outdoor dry blending powder coating
polyester resin.

4. Phase Transition Core
When
the temperature reaches the phase transition temperature, the structure
of the polyol phase transition material will change from the layered
body-centered structure to the isotropic facial-centered structure, and
the hydrogen bonds between the layers are broken, molecules change from
crystalline to amorphous, and release bond energy. It has the advantage
of large enthalpy of phase change, stable performance, long service
life. Gao Hongyi et al. [4] used the polyol characteristics of TRIS as a
phase change core to prepare an airgel based phase transition coating.
TRIS (CAS 77-86-1)
is not only an important biological buffer, but also an important
material for organic synthesis. Although the application in the field of
coatings is not very extensive, but with the development of science and
technology, we believe that TRIS will get more applications in this
area in the future.
References
[1] San C. Yuan, Mitchell S. Chinn. Non-yellowing polyester coating composition. US 7,087,672 B2, August 8, 2006.
[2]
Zhang Jianwei, Du Houjun, Wang Yudong, et al. Silane modified
polyurethane glass primer and preparation method. CN 102516921 B, 2013,
10, 02.
[3]
Deng Mujian, Zhang Liangfu, Cao Yongyi, and so on. Preparation of
polyester resin for outdoor dry blending powder coating. CN 102719180,
2012, 10, 10.
[4]
Gao Hongyi, Feng Yanhui, Zhou Xiaofei. A preparation method of
air-gel-based thermal phase transition coating. CN 105199472, 2015, 12,
30.
Edited by Suzhou Yacoo Science Co., Ltd.
订阅:
博文 (Atom)